Magellan MG-6130 Manual de Instalação descarregar pdf (Página 22)

Diagram 16

PMD-75 Motion Detector

Typical Position: Salon, Stateroom, and

Hallway

Typical Zone Definition: Follow or Follow /

Stay

Power: 3 x “AAA”

Description: It is recommended that the

motion detector be mounted high up on the

wall or corner of your vessels interior. It

should focus on susceptible areas that could

be prone to break in. It is important not to

focus on areas that could cause false alarms

(i.e. focusing in areas that may have

movement thru glass).

Powering the Unit

1. Insert 3

“AAA” batteries into the battery

holder while verifying polarity (Diagram 16).

2. Insert the battery holder into the back

cover and affix the battery connector to the

PCB (see “A1” and “A2” in Figure

Mounting

It is recommended that the motion detector

be mounted high up on the wall or corner of

your vessels interior. It should focus on

susceptible areas that could be prone to

break in. It is important not to focus on areas

that could cause false alarms (i.e. focusing

in areas that may have movement thru

glass). Temporarily mount the detector with

double sided tape and test that the location

is adequate with no possible false alarms.

Walk Test

Open the cover in order to trigger the anti-

tamper switch, and then snap the cover

back

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Sem comentários

Magellan MG-6130 Manual de Instalação Página 22